Text Links; Figure 41: System Control Center Home Page - Hughes NH9000 Installation Manual

System Control Center

Text links

The button links at the top of the page appear on all System Control Center screens and are
explained in Button links on page 61. (The Reception Info, Transmission Info, and Terminal
Status button links are not displayed until commissioning is complete.)

Figure 41: System Control Center home page

The System Control Center home page includes the following text links:
System Status links
• View System Status – Opens the System Status page, which displays general system status
information such as signal strength and administrative status.
• View Reception Information – Opens the Reception Information page, which displays
information on data received by the satellite modem.
• View Transmission Information – Opens the Transmission Information page, which
displays information on data transmitted by the satellite modem.
• View Terminal Status – Opens the Terminal Status page, which displays detailed information
about the operational status of the satellite modem such as interface packet counts and
acceleration statistics.
• View System Information – Opens the System Information page, which displays information
such as modem identification information and IP address information.
Note: These links take you to the same destinations as the button links at the top of each
System Control Center page.
Diagnostic utilities links
Connectivity Test – Opens the Connectivity Test page, which can be used to test the connection
between the satellite modem and the satellite. See Connectivity Test page
HN9000 Satellite Modem Installation Guide
1037576-0001 Revision G
Chapter 9
on page 83.
59