The Actas Sensor - Barco ACTAS 2 Owner's Manual

ACTAS set-up

The ACTAS Sensor

3
The Sensor unit consists of three adjustable grip de-
vices that can be attached to the three lenses of a CRT
projector. They are marked as 'BLUE', 'GREEN' and
'RED'. The middle grip marked as 'GREEN' is fixed,
while the other two on the sides can be moved horizon-
tally and turned around through the slots.
Internally, the Sensor unit contains 3 photo sensors
and an A-D convertor.
There is a DIN mini 8 port provided on the Sensor unit
for connecting to the Control Unit.
The supplied light cover (black cloth) is used to place
over the grips, when strong ambient light is present
during the alignment process. The connecting cable
can be passed through openings in the cloth.
1-4
Slots to move the grips horizontally
Milled edge screws
Grip for
Grip for
the green CRT
the blue CRT
Slots to turn around the grips
One set of 3 claws to
be attached to a lens
of a projector
Grip for
the red CRT
"TO CONTROL UNIT" : port for
connecting the Control Unit
Photo sensor
5975636 ACTAS 2 170297