Chapter 4 Color Alignment Of A Projector Wall; Connections; Walls Of A Split Video Type; Walls Of The Mvgs System - Barco ACTAS 2 Owner's Manual

Table of Contents

Advertisement

4
COLOR ALIGNMENT OF A PROJECTOR WALL

CONNECTIONS

The connections for the display walls are rather different
from those for a single stand-alone projector. First of all,
the projectors must be interconnected like a chain through
the RS232 input and output ports. Please refer to your
manuals of the projector or/and graph wall for explana-
tions for details.
Except the interconnections among the ACTAS units
remain the same, other connections have to be done in
terms of the wall system if the wall is a split video type or
it is a MVGS/EOS wall.

Walls of a split video type

If the wall is a split video type, the video signal from the
ACTAS Interface unit should be fed to the video splitter.
The following connections need to be done :
K
Interconnect the ACTAS system;
K
Connect the first projector in the chain as a single
stand-alone projector to the ACTAS Interface unit
(see Chapter 3, p.3-1);
K
Connect the video splitter to the 'Video' signal of the
'TEST PICTURE OUTPUT' on the ACTAS Interface
through one BNC connector (see Chapter 3, p.3-1).
Walls of the MVGS/EOS system
If it is a MVGS/EOS wall, the RGB signal paths remain
untouched, the ACTAS Interface Unit RGB signals are
not used.
The following connections need to be done :
K
Interconnect the ACTAS system;
K
Connect the first projector in the chain as a single
stand-alone projector to the ACTAS Interface unit
(see Chapter 3, p.3-1);
K
Connect the MVGS/EOS of the wall to the port
marked as 'TO HOST' on the ACTAS Interface
through a cable with D9 connectors.
Note :
In case of a wall system other than the MVGS/EOS, the
host computer should be able to generate signals.
5975636
ACTAS 2
170297
Wall of a split video type
Video Splitter
RS232
Video
IN
OUT
1xBNC
RS232
IN
OUT
RS232
ACTAS Interface
ACTAS
Control unit
Wall of a MVGS/EOS system
EtherNet
M V G S /
RGB
EOS
RS232
IN
OUT
RS232
RS232
IN
OUT
RS232
ACTAS Interface
ACTAS
Control unit
Aligning multiple projectors
RS232
RS232
IN
OUT
IN
OUT
RS232
RS232
IN
OUT
IN
OUT
3 X 2 Projectors
RS232
RS232
IN
OUT
IN
OUT
RS232
RS232
IN
OUT
IN
OUT
3 X 2 Projectors
4-1

Advertisement

Table of Contents
loading

This manual is also suitable for:

R9827961R9827968

Table of Contents