Remote Control Command Menu; The 'Adjust Keys' Mode; The Pause/Unpause Mode - Barco ACTAS 2 Owner's Manual

ACTAS software

REMOTE CONTROL COMMAND MENU

There are 4 modes included: the adjust keys, the pause,
the stand-by/operation, and the contrast and brightness.
To select a mode of remote control :
u
In the "Remote control" command menu, press the
<ENTER> key.
ç è
u
Use the ' ' or ' ' keys to select a desired mode.
u
Press the <ENTER> key to save the change. Press
the <EXIT> key to return. Changes made will be
discarded, the former will be retained.

The 'Adjust keys' mode

If the 'Adjust keys' emulation is selected, an intermediate
dialog allows for address changes. The button keys
labelled as ADJUST, ENTER, EXIT,
ACTAS Control Unit serve as button keys on a Remote
Control Unit for the addressed projector and do not
control the ACTAS any longer. Only the ADDRESS
button is reserved and is used to return to the interme-
diate dialog.
The 'Pause/Unpause' mode
Normally projectors can be in the pause mode, the
stand-by mode, and the operational mode (Please refer
to your owner's manual for the projector).
This function puts the selected projector or the whole
configuration into or out of the pause mode.
Note : The 'Pause' mode of the projector is not simply
toggled, but forced into the desired state.
2-24
Press 'ENTER'
Press '
<<<REMOTE CONTROL>>>
é ê ç è
ENT: adjust keys
çè
, , , on the
Press 'ENTER'
<<<REMOTE CONTROL>>>
éê
ENT: 6
ENTER: remote control
çè
: other command
<<<REMOTE CONTROL>>>
ENT: adjust keys
çè
: other function
EXIT
è
'
<<<REMOTE CONTROL>>>
ENT: pause / unpause
çè
: other function
EXIT
: other function
EXIT
: other address
EXIT
<<<REMOTE CONTROL>>>
ENT: pause / unpause
çè
: other function
Press 'ENTER'
è
: unpause proj
ç
: pause proj
é
: unpause all
ê
: pause all
è
Press ' ç ' to unpause projector 6.
Press ' ' to pause projector 6.
é
Press ' ' to unpause all projector.
ê
Press ' ' to pause all projector.
Press 'EXIT' to quit.
è
Press ' '
<<<REMOTE CONTROL>>>
ENT: stdby / operate
çè
: other function
EXIT
è
Press ' '
<<<REMOTE CONTROL>>>
ENT: contr & bright
çè
: other function
EXIT
è
Press ' '
(back)
<<<REMOTE CONTROL>>>
ENT: adjust keys
çè
: other function
EXIT
Press 'ENTER'
<<<REMOTE CONTROL>>>
éêçè
ADJ/ENT/EXIT/ :
projector commands
ADDR: quit proj 6
EXIT
6
6
/ EXIT
5975636 ACTAS 2 170297