Configuring The Lens, Shift To Center; Configuring The Lens, Tilt Sensor - Barco HDX-4K20 FLEX User Manual

GUI – Installation
Image 12–6 Lens menu,
Dynamic focus enabled
Note: The Dynamic focus slider is only visible when the light source is on.

12.4 Configuring the lens, Shift to center

What can be done?
The lens can be forced back to the center position by selecting Shift to center.
How force lens in Mid position
1. To force lens in Mid position, select Installation → Lens → Shift to Center.
2. Confirm by selecting CONFIRM.
Image 12–8 Example of the Shift to center action
The lens will calibrate itself and return to the center position.

12.5 Configuring the lens, tilt sensor

When to use the tilt sensor menu
The projector has a built-in tilt sensor that detects the angle at which the projector is mounted. The built-in tilt
sensor can be read out to see if the projector is used in an allowed position.
For details on the rotation the projector is allowed to be mounted in, consult the installation manual.
CAUTION: Using a projector with an abnormal rotation can severely damage the projector.
How to read the tilt sensor values
1. In the main menu, select Installation → Lens → Tilt sensor.
120 R5906070 /16 HDX 4K
Image 12–7 Lens menu,
Dynamic focus disabled