Before Using The Oven; Preheating The Oven - GASLAND chef Pro Series Instruction Manual

Demo mode
1. Press SETTINGS and Press START to go to the next page.
2. Press "0" on the number keypad. "DEMO MODE" and "OFF" will appear in the
display.
3. Press "1" to toggle between ON/OFF.
4. Press SETTINGS to confirm.
Note: Oven does not heat in DEMO MODE. The display counts down quickly.
Oven Use

Before using the oven

1. Select Bake cooking mode.
2. Set temperature to 500°F(260°C).
3. Allow the oven to operate for 30 minutes with the door closed and no food in
the cavity.
Note: Any odor that may be detected during this initial use is due to the
evaporation of substances used to protect the oven during storage.
4. Turn off the oven, and allow the oven to cool.
General
Important: Do not place anything, including dishes, foil and oven trays, on the
bottom of the oven when it is in operation to avoid damaging the enamel.
1. Place bakeware with food on one or both of the shelves provided with the
oven.
2. Press the Oven Mode control for the desired oven function.
3. Use the number keypad to enter the oven temperature.
4. Press START.

Preheating the oven

• Preheat the oven when using the Bake, Convection Bake and Convection Roast
modes.
• Selecting a higher temperature does not shorten the preheat time.
• Preheating is necessary for good results when baking cakes, cookies, pastry
and breads.
• Preheating will help to sear roasts and seal in meat juices.
• Place oven racks in their proper position before preheating.
• During preheating, the selected cooking temperature is always displayed.
• A beep will confirm that the oven is preheated and the "PREHEAT" writing will
turn off.
1 (844) 538-7890
support@gaslandchef.com
www.gaslandchef.com
3330-A Marathon Ct Charleston, SC 29418
12