Operational Suggestions; Temperature Probe - GASLAND chef Pro Series Instruction Manual

17 13

Operational suggestions

• Use the cooking charts, in this manual, as a guide.
• Do not set pans on the open oven door.
• Use the interior oven lights to view the food through the oven door window
rather than opening the door frequently.

Temperature probe

The temperature probe monitors the internal food temperature, which is frequently
used as an indicator of doneness especially for meats and poultry, and turns off
the oven when the internal food temperature reaches the programmed
temperature.
The temperature probe will work with all oven modes except for the Warm/Proof,
Sabbath and self-clean modes.
Important: Always unplug and remove the temperature probe from the oven when
removing the food.
To use the temperature probe:
1. Insert the probe into the food.
Note: For meats, the probe tip should be inserted into the center of the
thickest part of the meat. Make sure that the probe tip is not into the fat or
touching bone.
2. Place the food into the oven. Keeping the temperature probe as far away from
a heat source as possible, plug the temperature probe into the oven outlet.
Close the oven door.
3. Select the oven mode.
4. Enter the oven temperature by pressing the numbers on the keypad.
5. Press START. The set oven temperature will appear on the display throughout
cooking.
6. Enter the desired internal food temperature by pressing the numbers on the
keypad, and then press START.
1 (844) 538-7890
support@gaslandchef.com
BURN HAZARD
Use an oven mitt to remove temperature probe.
Do not touch broil element.
Failure to do so can result in burns.
WARNING
www.gaslandchef.com
3330-A Marathon Ct Charleston, SC 29418