Recalling Mode Memory - Canon imageRUNNER 1750 Copying Manual

IMPORTANT
If the Language Switch setting is set to 'On', some characters are restricted and
cannot be entered. To enter all characters, set the Language Switch setting to
'Off'. (See Chapter 3, "Configuring the Machine's Basic Settings," in the
Reference Guide.)
NOTE
• For instructions on how to enter characters, see Chapter 2, "Basic Operations,"
in the Reference Guide.
• If you press [OK] without entering any characters, the key name reverts to its
current name (default: M1 to M4).
• If you want to erase the assigned name, press [Backspace] repeatedly until the
name disappears ➞ press [OK].
❑
Press [OK] ➞ [Done].
If the key you named has no copy settings yet, press [Cancel] ➞ [Done].
The display returns to the top screen.

Recalling Mode Memory

1
Press [Special Features] ➞ [Mode Memory].
2
❑
Enter a name ➞ press [OK].
You can enter up to 10 characters for the
name.
Select the key containing the
copy settings that you want to
recall.
Frequently Used Settings (Mode Memory)
3
3-29