Two-Sided Copying - Canon Pixma MX520 Series Online Manual

Two-Sided Copying

When you select 2-sided for 2-sidedPrintSetting in Standard copy, you can copy two original
pages onto the both sides of a single sheet of paper.
Press the right Function button to select the orientation and the stapling side.
• When you select Portrait for Orientation and Long-side stapling for Stapling side of print
paper:
• When you select Portrait for Orientation and Short-side stapling for Stapling side of print
paper:
• When you select Landscp. for Orientation and Long-side stapling for Stapling side of print
paper:
• When you select Landscp. for Orientation and Short-side stapling for Stapling side of print
paper:
Note
When you select 2-sided for 2-sidedPrintSetting, Advanced is displayed on the LCD. You can
select the orientation and the stapling side of the paper by pressing the right Function button.
Also, you can select whether to display the preview screen when you load the original on the
platen glass.
After selecting the stapling side and press the OK button, you can select whether you use the
preview screen. If you select ON, the preview screen is displayed so that you can check the
orientation.
If Device memory is full. Cannot continue process. appears on the LCD when scanning, set
the print quality to Standard, then try copying again. If the problem is not resolved, set the print
quality to Fast and try copying again.