Configuring Sip Server Settings - RADVision SCOPIA Elite 5200 Series Installation Manual

d.
e.

Configuring SIP Server Settings

You can configure settings for SIP server profiles which set how the SCOPIA Elite 5200 Series MCU
and the registrar interact.
Depending on connection types supported by the SIP server, MCU supports these transport
connection types for sending messages to SIP server:
Procedure
Step 1
Select Configuration
Step 2
Select Protocols.
Step 3
Select Enable SIP protocol to enable MCU communication with the SIP server.
Step 4
Enter the SIP domain of the MCU in the Default SIP domain field as defined in the SIP server.
An example of a SIP domain is company.com.
RADVISION | Installation Guide for SCOPIA Elite 5200 Series MCU Version 7.5
Figure 4-4 The Status Map Showing the Gatekeeper Connection
Verify that the MCU is connected to the Ethernet.
Verify that the MCU is connected to the Gatekeeper.
•
UDP
•
TCP
•
TLS
.
Performing Initial Configuration of the SCOPIA Elite MCU | 25