How To Set The Mcu's Interface Languages; About Supported Languages - RADVision SCOPIA Elite 5200 Series Installation Manual

You must ensure that the service prefix numbers are not identical to the first digits of any of your
network endpoint phone numbers or aliases.
Procedure
Step 1
Select Configuration
Step 2
Select Conferences.
Step 3
Locate the Services list section.
Step 4
Select the Review button
Step 5
Enter the new prefix number.
Step 6
Select Apply.

How to Set the MCU's Interface Languages

About Supported Languages

SCOPIA Elite MCU has three user interfaces:
SCOPIA Elite MCU supports the same languages for the Administrator and Conference Control
interfaces, and a different set of languages for the text overlay.
RADVISION | Installation Guide for SCOPIA Elite 5200 Series MCU Version 7.5
•
About Supported Languages .................................................................. page 21
•
Setting the MCU's User Interface Language................................................ page 22
•
Setting a Text Overlay Language............................................................. page 23
•
Administrator interface—the web-based interface used by administrators for configuration
and maintenance tasks.
•
Conference Control interface—the web-based interface used by administrators and operators
for conference moderation and video layout control.
•
Text overlay on conference video—the set of menus that appear in the conference video.
.
next to the service.
Performing Initial Configuration of the SCOPIA Elite MCU | 21