Pdla Remote Programming - Agilent Technologies 86038B User Manual

PDLA Remote Programming

PDLA Remote Control DLLs
.NET Interface Hierarchy
212
The PDLA remote programming interface uses Microsoft.NET
Remoting technology. It is controlled by manipulating the
properties and methods exposed by the server object. The list of
events, properties and methods in this section describe the
interface that is available to a programmer wanting to use the
PDLA measurement engine in some other development
environment.
The PDLARemoteControl DLLs provide a communication link
with the PDLA application. The DLLs are comprised of a set of
Properties, Methods, and Events that together provide a basic
set of remote PDLA capabilities. The two DLLs of interest
are:remoteClient.dll and InstrumentObjects.dll. By default these
two DLLs are installed to: C:\Program Files\Agilent\Agilent
PDLA Remote Control\.
The PDLA Remote Control organizes its APIs into a Function
Tree hierarchy. This associates like functions into logical
groupings. Therefore, the remoting commands are grouped and
listed by function, then command type in the following sections.
Agilent 86038B Photonic Dispersion and Loss Analyzer, Second Edition