Agilent Technologies 86038B User Manual page 140

N O TE
N O TE
N O TE
N O TE
140
Editing your instrument's protocols and file access permissions
can result in unwanted behaviors that are difficult to reverse.
Ensure that your changes are valid!
Please consult with your network administrator concerning
advanced TCP/IP and multi-protocol configuration settings to
support your network.
Please contact your network administrator or IT department if
you have any problems connecting the PDLA to your network.
1 On the menu, click
File
2 Click , point to
Start
up Connections.
3 Then click
Local Area ConnectionProperties
4 On the tab (for a local area connection) or the
General
tab (all other connections), click I
Networking
, and then click
(TCP/IP)
all desired changes.
5 When you have finished making changes, restart the
instrument.
For more information, click Start > Help > Index, and search for
"DNS" or "WINS" or "static" or "dynamic."
To configure TCP/IP for static or dynamic addressing
• To get started, follow the same steps listed above.
Agilent 86038B Photonic Dispersion and Loss Analyzer, Second Edition
and then click
Exit
, and then click
Settings
. From here, you can make
Properties
.
Yes
Network and Dial-
.
nternet Protocol