Agilent Technologies 86038B User Manual page 224

DUTMinLossMaxGain: Property
GenerateMuellerAndPMDData Property
224
The value of this property specifies the expected minimum loss
or maximum gain of the device under test. This value is used by
the PDLA system to determine the maximum power to be
detected by the external power meters. If no external power
meters have been found in the current setup, the value of this
property is ignored.
Property Value
InstrumentObjects.ODACommon.eDUTLossGain
VB.NET Syntax
pdlaClient.DUTMinLossMaxGain =
InstrumentObjects.ODACommon.eDUTLossGain.eGain_M20dB
VB 6.0 Syntax
pdlaClient.DUTMinLossMaxGain =
eDUTLossGain_eGain_M20dB
Use this property to control the generation of Mueller matrix
and PMD vector data for export. Generation of this data results
in larger .oda files, when storing measurement results. See also:
ExportMuellerPMD Method.
Property Value
Boolean - True if Mueller matrix and PMD vector data for ASCII
export is generated
VB.NET Syntax
pdlaClient.GenerateMuellerAndPMDData = True
VB 6.0 Syntax
pdlaClient.GenerateMuellerAndPMDData = True
Agilent 86038B Photonic Dispersion and Loss Analyzer, Second Edition