Hard Drive Backup And Recovery - Agilent Technologies 86038B User Manual

Hard Drive Backup and Recovery

N O TE
302
The following procedure is used to back up or restore the
Windows operating system of Agilent 86038B.
MS Windows based instruments must have a keyboard attached
prior to starting this procedure.
1 Restart the instrument to access the boot option screen. A
keyboard is required. If the system begins to restore from
Hibernation, press F8 and then choose "Delete restoration
data and proceed to system boot menu". The Agilent PDLA
offers two boot options:
a Agilent Technologies PNA Series Network Analyzer
b Network Analyzer Backup and Recovery Program
2 Quickly select the second option using the arrow key. (The
first option is the default, and will be automatically selected
within a few seconds.)
3 When the Agilent Technologies System Utilities Screen
appears, select from the following options.
a 1. Restore the Factory Image
This process restores your system to the original, factory-
installed operating system and system software. A recovery
should be done if MS Windows is corrupted or if you have
been instructed to do so by an Agilent service engineer.
b 4. Exit the recovery program.
4 Enter the number associated with the desired action. For
example, enter 2 if you want to exit the utility with no
changes.
5 The procedure will begin. Follow the onscreen instructions to
complete the process. The procedure will take approximately
10 to 20 minutes to complete.
6 When the process is finished, restart the instrument and
reinstall the 86038B software.
Agilent 86038B Photonic Dispersion and Loss Analyzer, Second Edition