System Commands
LaserState Method
PowerMeterZero Method
Preset Method
272
Turns the laser on/off at the TLS output. The laser will turn
back on when a measurement is started.
Parameters
OnOffState - Specifies the desired state of the laser.
VB.NET Syntax
pdlaClient.System.LaserState _
(Instrument.Objects.ODACommon.enumOnOff.eOn)
VB 6.0 Syntax
pdlaClient.System.LaserState (enumOnOff_eOn)
Causes the external power meters, if installed, to perform the
zero function.
VB.NET Syntax
pdlaClient.System.PowerMeterZero()
VB 6.0 Syntax
pdlaClient.System.PowerMeterZero
Sets the instrument to defined setup conditions. Preset can only
be called when the PDLA is idle.
VB.NET Syntax
pdlaClient.System.Preset()
VB 6.0 Syntax
pdlaClient.System.Preset
Agilent 86038B Photonic Dispersion and Loss Analyzer, Second Edition