Agilent Technologies 86038B User Manual page 229

Normalize Method
PrintScreen Method
Agilent 86038B Photonic Dispersion and Loss Analyzer, Second Edition
Starts a normalization.
Parameters
Optional ByVal NormMode As
InstrumentObjects.ODACommon.enumAcquisitionMode =
eNormalization
Allowed NormMode values are:
InstrumentObjects.ODACommon.enumAcquisitionMode.eModBi
as
InstrumentObjects.ODACommon.enumAcquisitionMode.eOptPo
larizer
InstrumentObjects.ODACommon.enumAcquisitionMode.eNorm
alization
If NormMode = eModBias, then only an optical modulator
optimization is done during normalization.
If NormMode = eOptPolarizer, then only the input polarizer is
optimized during normalization.
If NormMode = eNormalization, then a complete Normalization
measurement is done.
VB.NET Syntax
pdlaClient.Actions.Normalize(InstrumentObjects.ODACommon.
enumAcquisitionMode.eNormalization)
VB 6.0 Syntax
pdlaClient.Actions.Normalize(InstrumentObjects.ODACommon.
enumAcquisitionMode.eNormalization)
This command is equivalent to the front panel Print button.
VB.NET Syntax
pdlaClient.Actions.PrintScreen()
229