Agilent Technologies 86038B User Manual page 206

206
The statistics are calculated for Gain and Group Delay. The
All Measurements block is calculated treating all wavelengths
of all measurements equally. This is useful for measuring
very flat and stable devices like a length of fiber. For devices
that have more features to the response, the statistics for the
deviation from the first measurement are also calculated.
This shows you at a glance how stable the device was after
the first measurement. This information is also stored at the
end of the run in the ODA_stats file.
Just below the Statistics are is the Status area. The blue bar
is used to show the timer between PDLA measurements:
During the measurement itself, the blue bar is full and the
Status area reflects what the PDLA is doing:
7 Install the .NET Framework from Microsoft. Refer to
Client" on page 141.
8 Install the remote programming application from the PDLA
documentation CD located at:
C:\Program Files\Agilent\Agilent PDLA Remote
Control\Examples\Example4_RepeatMeas\Application\
And run OdaRepeatMeas.exe
There are three main functional blocks in the code:
• Triggering measurements and setting up the delay between
measurements
Agilent 86038B Photonic Dispersion and Loss Analyzer, Second Edition
"Install the Remote