Agilent Technologies 86038B User Manual page 217

TLSSettingProgress
(ByVal progress As enumStatus)
TriggerProgress
(ByVal progress As enumStatus, ByVal eTriggerMode As
enumAcquisitionMode)
Agilent 86038B Photonic Dispersion and Loss Analyzer, Second Edition
Indicates a laser settling has started or completed. Once a laser
settling has begun, the PDLA will not be able to make
measurements until it is complete. To avoid settling in the
middle of your test, track the estimated time until laser settling.
When it falls below 10 minutes, you should force a TLS settling
with the TLS.ForceSettling method.
Parameters
progress - Indicates TLS Settling has begun or completed.
Related Command
• TLS.ForceSettling method
Indicates a trigger has begun, has been aborted, or has been
completed. Some actions such as normalization may include
several sweeps. This event is provided to tell you when the
entire action is complete. In general, this event is more useful
than SweepProgress because you only get one "begin" and one
"completed" per action.
Parameters
progress - Indicates the measurement action has begun,
completed, or has been aborted.
eTriggerMode - Indicates the subset the event resides in.
(Normalization, Measurement, ModBias, DriftMonitor, Length)
217