Table of Contents
Advertisement
Instructions for use SONICflex 2000 N - 0.571.5020
3 Product description | 3.1 Technical Specifications
3 Product description
SONICflex 2000 N (Mat. no. 0.571.5020)
The SONICflex is a dental handpiece that complies with ISO 15606. The vibration is
generated by a rotating steel sleeve. In connection with the different KaVo tips, an os‐
cillating elliptical tip movement is generated for the respective application. The internal
water cooling (spray cooling) prevents the treatment field from heating up, and keeps
the treatment surface clean.
Note
The device should be operated with the described operating pressure. After start‐
ing, the intensity can be regulated using the foot switch at maximum drive pressure.
3.1 Technical Specifications
Drive pressure
Air consumption
Water use
Frequency
Recommended pressure
The SONICflex can be mounted on all MULTIflex couplings.
3.2 Transportation and storage conditions
It is hazardous to start up the medical device after it has been stored refrigerated.
This can cause the medical device to malfunction.
▶ Prior to start-up, very cold products must be heated to a temperature of 20
25
C (68
F to 77
F).
o
o
o
Temperature: -20°C to +70°C (-4°F to +158°F)
Relative humidity: 5% RH to 95% RH absence of condensation
Air pressure: 700 hPa to 1060 hPa (10 psi to 15 psi)
Protect from moisture
2.5 to 4.2 bar (36 to 61 psi)
26 to 33 NL/min.
30 to 50 rpm
6 kHz
1 to 2 N
CAUTION
10 / 26
C to
o
Advertisement
Table of Contents
