Table of Contents
Advertisement
Available languages
Available languages
3 - SPECIFICATIONS
IMPORTANT!
•
The picture of each individual part mentioned in the text is indicated in the table given in paragraph 3.8.
•
In order to obtain supreme quality products, the olives should be processed within 24 hours of harvesting. Quality oil
may not be obtained if the olives are processed 7-8 days after harvesting.
3.3 Supplied parts
•
Use & Maintenance Manual.
•
Keys set.
3.4 Recommended use
Olive oil processing plant BuonOlio TOP is designed and constructed for the production of extra-virgin olive oil. Any other use
constitutes an unintended and therefore potentially dangerous use and voids the warranty.
3.5 Specifications
•
Model: ....................................................................................... BuonOlio TOP
•
Hourly production capacity: ............................................................ 60 ÷ 80 kg/h
•
Average daily production (8 hours): ........................................................ 500 kg
•
Power requirements: ........................................ 4 kW/h (recommended 6 kW/h)
•
Standard power supply: - .................................. 220 V three-phase 50-60 Hz
•
Power supply with inverter: ............................... 220 V single-phase 50-60 Hz
•
Paste heater: ............................................................................................. None
•
Water to DECANTER control: ......................................................... Flow meter
•
Installation: ............................................................. On caster wheels with brake
•
DECANTER cylinder drive: ................................................. With toothed belts
•
DECANTER screw feeder drive: ........................................ With toothed belts
•
DECANTER speed: ......................................................................... 3200 rpm
•
CRUSHER type: ................................................................ With knives (no. 3)
•
Overall dimensions (length-width-height) ................................. See figure (T)
•
Weight: ................................................................................................... 480 kg
•
Hopper capacity: ...................................................................................... 50 kg
•
Recommended room temperature: ............................................ >15 ÷ < 25 °C
•
Humidity: .......................................................................... Min 40% / Max 60%
3.6 Safety devices
The following safety devices and guards are provided to eliminate any risks of injury:
•
Motor overload cut-outs (16).
•
Earth–ground connections.
•
Electric cables with adequate cross–section (protected with electromagnetic screening for 220 V single–phase model).
•
Fixed guards on all moving parts.
•
Grid (18) on olive hopper.
•
Vibration balancing.
•
Parts in contact with food products in stainless steel.
•
Control panel with IP54 grade protection.
•
Insulated structure to protect against and reduce airborne noise levels.
•
Tube and grid to protect pomace oil discharge screw feeder (8).
22 - 72
- .................................. 380 V three-phase 50-60 Hz
Advertisement
Chapters
Table of Contents
