Introduction; Consulting The Use & Maintenance Manual; Symbols And Qualifications Of The Operators; Compliance Certificate - CAMPAGNOLA BuonOlio TOP Use And Maintenance Manual

1

- INTRODUCTION

1.1 Consulting the Use & Maintenance Manual
Before working on the equipment, carefully read and understand this Use & Maintenance Manual in order to safeguard the
operator and to avoid damaging the equipment.
These instructions describe how to operate the equipment safely, economically and in compliance with the current safety regu-
lations. Following these instructions helps avoid dangerous situations, reduce repair costs and down-time and extend the serv-
ice life of the equipment.
This manual is to be kept legible and in good condition. The operating and maintenance staff should have this manual at hand,
so that they can consult it whenever needed.

1.2 Symbols and qualifications of the operators

All operations described in this manual should be performed by qualified personnel and as outlined in the manufacturer's
manual. Each procedure described herein is accompanied by an icon which indicates the qualifications required by the opera-
tors. The instructions required to identify the personnel qualifications are given below.
Operators
Person or persons entrusted with general installation, operation and adjustment, and routine maintenance, cleaning, repair or
transportation of the equipment.
Mechanics
An individual with specific mechanical skills, capable of carrying out installation and major servicing and/or repair operations as
indicated in this publication (not authorized to do electrical jobs).
Maintenance electricians
Specialized electricians capable of performing the same jobs as the "operator" and work with the machine in normal operating
conditions with the safety guards disabled for maintenance and/or repairs (not authorized to work on mechanical parts).
AUTHORIZED SERVICE POINTS
These are the centres, indicated by our sales staff, authorized to repair the products manufactured by CAMPAGNOLA S.r.l.
WARNING!
Precautions to be taken in order to safeguard the operators and bystanders in the work area.
IMPORTANT!
Precautions to be taken in order to avoid problems with the equipment and to operate it in compliance with the current
safety regulations.

1.3 Compliance certificate

All equipment to be marketed in the European Union (EU) fully complies with the European Council Directive 98/37/EC.
The compliance certificate is supplied by the manufacturer with the Use & Maintenance Manual.

1.4 Receiving the product

When receiving the product, make sure:
• the product has not been damaged during transport;
• the product supplied is the same as that ordered. Check that all accessories have been delivered (refer to "Product Descrip-
tion", "Specifications" chapter).
If problems arise, contact the CAMPAGNOLA S.r.l. Service Department quoting all details stamped on the nameplate (refer to
"Product Description", "Specifications" chapter).
18 - 72