Parts Supplied; Intended Use; Tool Composition; Technical Data - CAMPAGNOLA Star 40 Use And Maintenance Manual

Parts supplied

Use and maintenance manual.

Intended use

The tool has been designed for cutting and pruning according to the above-described manners and limits.
Any different use is not allowed. Examples of different use is cutting objects made of metallic or rubber materials, fabrics,
synthetics, meat or food, stones, pieces of cement, glass or glass compounds, carbon fibre.
• Any other use has to be considered improper and potentially dangerous for the operators' safety. This would
make any warranty claims void.
• If it is not used for the purposes it was designed for, the tool may cause serious injuries to personnel and
bystanders and damages to equipment and things.

Tool composition

Pos. Denomination
1 Identification sticker
2 Shear body
3 Operating lever
4 Moving blade
5 Operating lever safety catch
6 Hand guard
7 Fixed Blade
8 Blades fixing screw
9 Conrod pin
10 Blade pin
11 Piston group
12 Piston spring
13 Piston seal
14 Nut
15 Extension pole connection
16 Fitting
17 Front cover
18 Front cover fixing screws
Fixed extension pole
19
20 Telescopic extension pole
21 Extension pole grip

Technical data

Cutting diameter .......................................................................................... 40 mm
Weight ........................................................................................................... 675 g
Working pressure ...................................................................... 1000 kPa (10 bar)
Max. air consumption ............................................................................... 1.0 l/min

Safety devices

• The safety catch (5) engages itself automatically by releasing the operating lever (3) and prevents the tool from
starting up accidentally.
• The guard (6) protects the operator's hand from blows.
Use and maintenance manual – Translation of
original Instruction Rev.: 01, Date 10/11/2021
Function
Shows the product identification details
Allows to hold the shears
It is pressed to operate the shears
Is the cutting blade
Prevents any accidental tool operation
Protects the hand from blows and the operating lever from any
accidental tool operation
Is the blade supporting the branch to be cut
Locks the blade group
Joins the conrod to the moving blade
Is a fulcrum and locks the blade group
Transmits the cutting force
Is the piston return spring
Is the piston air seal
Locks the seal on the piston
Joins the shear to the extension pole
Connects the shear to the mains
Protects the conrod
Fix the front cover on the shear body
Holds the tool and makes it easier to work from the ground
Holds the tool and makes it easier to work from the ground
Grip and shear drive valve
Ref.
A
B-D-G
M
B-C-N
M
M
B-C-N
B
C
B-C
F-G
G
F
F
B-D-E-G-H
L-M
B
B
O
O
O
Page 23