Changing Work Attachments - Terex TL160 Operating Manual

5.2

Changing work attachments

5.2.1 General
To achieve maximum utilization of the machine for a
variety of applications, a great number of work attach-
ments and accessories are available.
The machine is equipped with a quick-attach system,
to shorten the time it takes to change attachments.
When mounting a multi-purpose bucket, front sweep-
er, etc., an additional control circuit is required.
Attention
Under certain circumstances, it is possible to
use the work attachments of predecessor
models on our machines. When mounting
work attachments of predecessor models,
however, these may have to be adjusted
and/or are subject to utilization restrictions.
The installation of work attachments which
are not included in our product range requires
our written approval. It is essential to consult
your dealer before mounting such a work at-
tachment.
Danger of injury
due to unsecured work attachments.
• When attachments have been removed,
they must be secured against overturning
to avoid possible injury to persons.
TL160
Operating Manual 12.9.08 Version 1.0
Working Operation 5
55/112