Terex TL160 Operating Manual page 39

Legend Fig. 9
20 Brake accumulator pressure
21 ORANGE - pre-heating monitor
22 RED - battery charge indicator
23 RED - parking brake
24 GREEN - travel direction, forward
25 Coolant temperature
26 Operating hour meter
27 Fuel-level indicator
28 GREEN - travel direction, reverse
29 GREEN - direction indicator
30 BLUE - high beam
31 RED - engine oil pressure
32 RED - air filter indicator
33 Travel speed - FAST - SLOW
34 High-gear changeover switch
Attention
Transmission only shifts at a speed of
below 0.5 km/h!
35 Multi-function switch with lock for work equipment
cut-off and change-over of the direction-of-travel
preselection switches from Pos. 7 to Pos. 36
Machine damage
due to incorrect operation.
Only press if machine is at standstill!
36 Preselection of travel direction - Function only
active if working hydraulics are disabled
37 Not assigned*
38 Option – bucket return positioner
39 Engine cooler reversing fan changeover switch
40 Windshield washer function front/rear
41 Windshield wiper, front
42 Windshield wiper, rear
43 Option – rear fog lamp
44 Option – back-up warning lamp
45 Option – rotating beacon
46 Working floodlight, rear
47 Working floodlight, front
48 Hazard warning switch
49 Flow rate adjustment for 3rd control circuit
50 Option – preselection switch for 4th control circuit
OFF/Impulse/Continuous operation
51 Option – ride control system
52 Preselection switch - float position -
OFF/Impulse/Continuous operation
TL160
53 Preselection switch for 3rd control circuit
OFF/Impulse/Continuous operation
54 Parking brake preselection switch ON/OFF, ON =
locked
55 Not assigned*
56 Not assigned*
57 Not assigned*
58 Option – mirror heating
59 Option – pressurized cabin
60 Option – central lubrication
61 Glow plug and starter switch
62 Not assigned*
63 Control unit heating / Klimatronic
64 Option - radio
65 Speed indicator
66 Monitor - indicator "manual transmission range I"
67 Monitor - indicator "manual transmission, range II"
(optional for high-speed version)
68 Monitor - indicator "manual transmission not ready
for operation"
69 Option – soot filter
clogging indicator
70 Hydraulic oil filter
clogging indicator
71 Engine oil level
72 Hydraulic oil level
73 Coolant Level
* for non-standard equipment
Operating Manual 12.9.08 Version 1.0
Operation
Attention
If this symbol comes up, the manual
transmission is in an intermediate position.
The machine is not ready for driving! This
can be remedied by performing brief
steering movements until the manual
transmission engages.
4
39/112