Terex TL160 Operating Manual page 41

Wheel loader
Table of Contents

Advertisement

4.3.2
Monitoring the machine during operation
Engine damage
due to fault which has not been remedied.
• The fault must be remedied before
restarting the engine and operating the
machine again.
If the battery charge indicator (11/22) or the engine
oil pressure indicator lamp (11/31) lights up, switch
off the engine immediately and determine the
cause. If necessary, call for service personnel.
If the permitted coolant temperature (11/25) is
exceeded, stop work, open the engine hood and
keep the engine running at idle speed to allow it to
cool down.
Once the engine has cooled down, turn it off and
determine the cause of overheating. If necessary,
call for service personnel.
If the air filter service indicator lamp (11/32) lights
up, perform the necessary air filter maintenance.
4.3.3
Switching off the engine
Attention
Do not switch off the engine when running at
full throttle, but allow it to run for a short time
without load at low idle-running speed.
Turn the ignition key to "0".
The engine stops automatically.
TL160
22
Fig. 11 Monitoring and switching off the engine
Operating Manual 12.9.08 Version 1.0
Operation
25
P
12 Km/h
-
+
00014,0 h
1/2
0
4
31
32
4/4
41/112

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tl160s

Table of Contents