7
Care and Maintenance
Replacing the transmission oil
•
Park the machine on level ground.
•
Clean the area around the inspection, filling (76/1)
and drain plugs (76/2).
Attention
• Collect the waste oil in a suitable container
and dispose of in compliance with
regulations.
•
Open the inspection-filling plug (76/1).
•
Open the drain plugs (76/2) on the differential and
brake housings and drain oil.
•
Flush out the axle if necessary.
•
Carefully close the drain plugs.
•
Pour in oil using the filling hole until oil escapes
from the other inspection hole.
•
Carefully close the inspection-filling plug (76/1).
98/112
Fig. 76
Replacing the transmission oil
Operating Manual 12.9.08 Version 1.0
TL160