Terex TL160 Operating Manual page 51

4.8.4 Driving on roads
• Before driving on open roads, the following points
have to be observed:
Endangerment of road-traffic
due to missing equipment.
Ensure that the wheel loader is equipped as
stipulated by the regulations authorizing the
use of vehicles for road traffic in the user's
country.
• Empty the bucket and tilt back completely.
• Attach the protective device onto the front bucket
edge.
• Secure the side-dump bucket with socket pins.
• Completely retract the high-tip bucket.
• Fold up the forks of the fork lift attachment, lock in
place and secure against lateral shifting.
Danger to life
due to rigid forks.
• Rigid forks must be dismounted before
driving on public roads!
• Raise the lift frame as far as the height color mark
(22/1) until sufficient ground clearance is secured.
• Set the travel direction preselection rocker
switches on the joystick (23/7) and on the
instrument panel (23/36) to "0" (neutral position).
• Switch off the working hydraulics (23/35).
Attention
Only press when machine is stationary!
• Check the function of the direction indicators,
hazard warning lights, horn, low/high beam.
• Close the cabin door.
TL160
Fig. 22 Height color mark
Fig. 23 Driving on roads
Operating Manual 12.9.08 Version 1.0
Operation
1
P
12 Km/h
-
+
00014,0 h
1/2
0
35
36
P
12 Km/h
-
+
00014,0 h
1/2
0 4/4
4
4/4
7
51/112