Terex TL160 Operating Manual page 75

O = Checking, maintenance
X = Replace
Perform work with machine at operating temperature
32 Differential – rear axle including transmission: oil check and/or oil
change
33 Differential – front axle: oil check and/or oil change.
34 Wheel hubs of front and rear axles: oil check or oil change
35 Grease machine according to overview of lubricating points.
36 Check function, condition and completeness of safety devices.
37 Hydraulic function check with pressure function test.
38 Test run and test work.
39 Initial inspection card and return to manufacturer.
Tab. 29 Inspection plan
1
At least every two years.
2
Extension of oil change intervals according to oil sample analysis and laboratory report
3
Within warranty.
TL160
Care and Maintenance
after
100
X
X
X
O
O
O
O
O
Operating Manual 12.9.08 Version 1.0
operating hours min.
2 x
ev- ev- ev- an-
ery ery ery nual-
ly
500 1000 2000
O X
O X
O X
O
O
O
O
3
O
7.2, 64.
7
min.
1 x
Chapter
an-
nual-
ly
X 7.8.14.2, 97
X 7.8.14.1, 96
X 7.8.14.3, 99
7.7.3, 72
7.3, 64
75/112