7.8.5.5
Draining the fuel tank and cleaning the
screen
•
Drain water from the fuel tank through the water-
drain plug (53/1).
•
Clean the filling screen (53/2) and check for
damage; replace if required.
7.8.6
Air filter, air intake
Machine damage
due to dust being drawn into the engine.
• All work on the air intake system must be
carried out with the engine off.
• Do not start the engine while the filter
cartridge is removed.
7.8.6.1
Cleaning the dust ejection valve
The dust ejection valve (54/1) is largely maintenance-
free.
•
Any baked-on dust can be removed by squeezing
the valve together.
7.8.6.2
Cleaning or replacing the air intake
•
Check the air filter attachment and retaining straps
for damage.
•
Check the tightness of the air intake between the
air filter and the engine.
•
Examine rubber parts for damage and replace if
necessary.
Attention
•
Replace damaged parts immediately!
TL160
Care and Maintenance
L160-736
Fig. 53 Draining the fuel tank and cleaning the screen
Fig. 54 Cleaning the dust ejection valve
Operating Manual 12.9.08 Version 1.0
7
2
1
1
L854-42
83/112