Terex TL160 Operating Manual page 33

Fork lift attachment
Width of fork carrier
Length of forks
Fork cross section
Max. stacking height
Tab. 18 Dimensions of fork-arm connection in compliance with ISO/FEM Class 3 Form B, DIN 15 173 / ISO 2328 respectively
The payloads are determined in compliance with DIN
24094 / ISO 8313 respectively with a stability factor of
1.25 or 80 % of the tipping load and the machine
moving over level ground.
The payloads are valid for the machine fitted with
15.5R25 tires and the equipment condition as
described in compliance with ISO 6016.
Total lift range
500 mm
19,7 inch
+0,5 bar
+7,3 psi
Tab. 19 Total lift range of fork attachment
Transport position
500 mm
19,7 inch
+0,5 bar
+7,3 psi
Tab. 20 Transport position of fork lift attachment
If screw-on rear axle weights or rear tires with
hydroinflation are used.
kg
lbs
Attention
During fork lift operations, the tire pressure of
the front wheels must be increased by at
least 0.5 bar.
TL160
kg
+
lbs
kg
+
lbs
Operating Manual 12.9.08 Version 1.0
Technical Specifications
S=2.0
kg 2000
lbs 4710
kg 2180
kg
lbs
lbs 4820
kg
lbs
S=1.67
kg 2620
lbs 5770
kg 2620
kg
lbs
lbs 5770
kg
lbs
3
mm
1900
1120
140 x 50
3570
S=1.25
3200
7040
3500
7700
S=1.25
3500
7700
3500
7700
33/112