Terex TL160 Operating Manual page 54

5 Working Operation
Continuous operation - Additional control circuit
• Additional control circuit (26/53) in Position 2 - red
indicator lamp lights up.
Danger to life
due to incorrect operation.
• Observe the function of the attachment
(e. g. rotating direction of attachment).
Attention
The additional control circuit must always be
switched off unless additional equipment is
operated.
Operation - Float position of lift frame
Attention
The float position must always be switched
off unless operated. Switch (26/52) in Posi-
tion "0".
Impulse Mode
• Float position switch (26/52) in Position "1".
• Lower the bucket onto the ground.
• Press switch (26/8). Float position is activated.
Continuous operation
• Lower the bucket onto the ground.
• Switch (26/52) in Position "2" - green indicator
lamp lights up.
54/112
Fig. 26 Operating the loader
Operating Manual 12.9.08 Version 1.0
P
12 Km/h
- +
00014,0 h
1/2
0 4/4
50 52 53
8
P
TL160