Terex TL160 Operating Manual page 95

7.8.13 Replacing the breather
Machine damage
due to dirt reaching the uncovered hydraulic
oil tank.
• Before starting, clean all parts above the
tank.
Attention
• The breather must be replaced if it is dirty,
for example due to hydraulic oil vapor.
• Remove the breather (71/2) and dispose of
according to regulations.
• Clean the screen (72/3) and check for damage;
replace if required.
• Screw in new breather (72/1) with O-ring (72/2)
and tighten by hand.
TL160
Care and Maintenance
L864-724
Fig. 71 Hydraulic oil tank
1
2
3
Fig. 72 Replacing the breather
Operating Manual 12.9.08 Version 1.0
7
2
L864-725
95/112