Table of Contents
Advertisement
! Never use alcohol to clean the jet area of the cartridge.
! Do not wipe as wiping may damage the jets.
5.
Insert the cartridge into the carrier and click it into place. Select Access
Cartridges in the printer's software control panel to return the carrier to
the service station.
6.
Prime the cartridge as described on p. 40. If the inkjets fire correctly,
perform the appropriate calibration procedure as described on p.41.
7.
If misfires continue, remove the cartridge. Rinse excess ink from the
bottom of the cartridge using distilled water.
8.
Dry all surfaces of the cartridge, except for the jet area and the circuit
plate.
9.
Repeat steps 4 and 5 once or twice. If the problem continues, the
cartridge should be replaced.
10. Close the printer's cover.
36
User's Guide
Advertisement
Table of Contents
