Choose The Correct Printing Mode; Use The Right Software - ENCAD Croma24 User Manual

Choose the correct printing mode

Croma24's four print modes - draft, normal, quality, and best - let you
tradeoff printing quality and speed. Save time and money by using
"draft" and "normal" modes for your concepts. Then, switch to
"quality" or "best" for your final print.
The table which follows lists the parameters for each mode.
Print
mode
Draft
Normal
Quality
Best

Use the right software

The quality of the software driver or the raster image processor (RIP)
can be very important, especially when printing continuous tone
images, PostScript images, or 3D renderings. That is why ENCAD has
developed Croma PS, a cost-effective software PostScript RIP
especially designed to work with Croma24 and our NovaJet® line of
inkjet printers. Using software without advanced imaging features
could result in images which are grainy when enlarged.
16
Color/ Print
Mono Passes
Color 1
Color 1
Color 3
Color 4
User's Guide
DPI Print
Direction
300 Bidirectional
300 Single, left
to right
300 Single, left
to right
300 Single, left
to right
Speed
(IPS)
23.3
23.3
16.6
16.6