Advertisement
AW00166601000
1 Introduction
This readme describes how to build a joint camera system consisting of a Basler ace/ace 2 area
scan camera and a Basler blaze 3D ToF camera. Such a camera assembly will allow you to create
color point clouds or add high-resolution 2D images to your 3D application to enhance your pattern
recognition or object detection algorithms.
The readme lists the components required as well as installation instructions.
The assembly includes a mounting bracket for joining the two cameras that has been designed by
Basler specifically for that purpose. In addition to the .stp and .stl files included in the package,
this readme also contains some recommendations for 3D printing.
2 Hardware Requirements
Description
Camera, Basler blaze-101
Camera, ace GigE or ace 2 GigE
Lens, Basler C125 series 4/6/8 mm
Socket screw, M3 x 14, ISO 4762
Socket screw, M4 x 35, ISO 4762
blaze & ace mounting bracket
The design of this mounting bracket is intended for test and evaluation purposes
only. It's not recommended for mass production.
How to Join a Basler blaze camera and a Basler ace/ace 2 Camera
Quantity
1
1
1
3
2
1
Notes
Order number 107796 (Rev. 08+)
(see recommendations below)
(see recommendations below)
See Suggested Printing Parameters
Readme
2
Advertisement
