Table of Contents
Advertisement
[SCREEN FORMAT]
[16:10]
[4:3]
[16:9]
4)
Press as to select [SCREEN POSITION].
f [SCREEN POSITION] cannot be selected or adjusted when [SCREEN FORMAT] is set to [16:10].
5)
Press qw to adjust [SCREEN POSITION].
[AUTO SIGNAL]
Set whether to execute automatic setup of signals automatically.
The screen display position or signal level can be adjusted automatically without pressing the <自动设置> button
on the remote control on each occasion if you input unregistered signals frequently at meetings, etc.
1)
Press as to select [AUTO SIGNAL].
2)
Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[ON]
[AUTO SETUP]
Set this when adjusting a special signal or horizontally long (such as 16:9) signal.
Setting with [MODE]
1)
Press as to select [AUTO SETUP].
2)
Press the <执行> button.
f The [AUTO SETUP] screen is displayed.
3)
Press as to select [MODE].
4)
Press qw to switch the item.
f The items will switch each time you press the button.
[DEFAULT]
[WIDE]
[USER]
f Proceed to Step 7) when [DEFAULT] or [WIDE] is selected.
f Proceed to Step 5) when [USER] is selected.
5)
Press as to select [DISPLAY DOTS], and press qw to match [DISPLAY DOTS] to the horizontal
resolution of the signal source.
6)
Press as to select [MODE].
7)
Press the <执行> button.
f Automatic adjustment is executed. [PROGRESS] is displayed while in automatic adjustment. When
completed, the screen returns to the [AUTO SETUP] screen.
Note
f Automatic setup of signal can be executed when analog RGB signal consisting of dots such as computer signal, or DVI-D/HDMI signal is
being input.
Chapter 4 Settings — [DISPLAY OPTION] menu
Range when [SCREEN POSITION] is selected
Cannot be adjusted.
Adjusts the horizontal position between -160 and 160.
Adjusts the vertical position between -60 and 60.
Sets the auto signal function to off.
Executes automatic setup automatically when images are changed to unregistered signals during
projection.
Standard setting.
Select this item when an image aspect ratio is a wide-screen signal, which does not meet the
[DEFAULT] setting.
Select this when receiving a signal with a special horizontal resolution (number of display dots).
ENGLISH - 101
Advertisement
Table of Contents
