Table of Contents
Advertisement
3)
Press as to select a system format.
f Available system formats vary depending on the input signal.
Input
HDMI input,
DIGITAL LINK input
DisplayPort input,
PressIT input, SLOT input
4)
Press the <ENTER> button.
Note
f For details of the types of image signals that can be used with the projector, refer to "List of compatible signals" (x page 294).
f This may not function properly for some connected external devices.
f The selection item for the DIGITAL LINK input can be selected when the optional DIGITAL LINK Terminal Board (Model No.: TY-SB01DL) is
installed in the slot.
f The selection item for the PressIT input can be selected when the optional Wireless Presentation System Receiver Board (Model No.:
TY-SB01WP) is installed in the slot.
f The selection item for the SLOT input can be selected when the Function Board from other manufacturers is installed in the slot.
f For the SDI input and the SDI OPT input, the signal format can be set in detail in the [DISPLAY OPTION] menu → [SLOT IN].
[DEFAULT PICTURE MODE]
Set the picture mode to be applied when a new signal is input. The setting in the [PICTURE] menu → [PICTURE
MODE] will switch according to the setting.
1)
Press as to select [DEFAULT PICTURE MODE].
2)
Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
[STANDARD]
[CINEMA]
[NATURAL]
[REC709]
[DICOM SIM.]
[DYNAMIC]
[GRAPHIC]
Note
f The following are the conditions where the setting in the [PICTURE] menu → [PICTURE MODE] is switched to the picture mode set in
[DEFAULT PICTURE MODE].
g When a new signal is input
g When the deleted signal is input again after the registered signal has been deleted
g When the <DEFAULT> button is pressed while the [PICTURE] menu → [PICTURE MODE] is selected
g When there is no input signal
sRGB-compliant video
sRGB is an international standard (IEC61966‑2‑1) for color reproduction defined by IEC (International
Electrotechnical Commission).
Set according to the following steps to reproduce more faithful, sRGB compliant colors.
1)
Set [COLOR MATCHING] to [OFF].
f Refer to [COLOR MATCHING] (x page 123).
2)
Display the [PICTURE] menu.
f Refer to "[PICTURE] menu" (x page 97).
3)
Press as to select [PICTURE MODE].
4)
Press qw to set [REC709].
5)
Press as to select [GAMMA].
106 - ENGLISH
Chapter 4 Settings — [PICTURE] menu
480/60p or 576/50p signal
Signals other than above
Select [AUTO], [RGB], or [YP
P
B
Set [PICTURE MODE] to [GRAPHIC] when a computer signal is input or [STANDARD] when a video
signal is input.
Set [PICTURE MODE] to [STANDARD].
Set [PICTURE MODE] to [CINEMA].
Set [PICTURE MODE] to [NATURAL].
Set [PICTURE MODE] to [REC709].
Set [PICTURE MODE] to [DICOM SIM.].
Set [PICTURE MODE] to [DYNAMIC].
Set [PICTURE MODE] to [GRAPHIC].
System format
Select [AUTO], [RGB], or [YC
Select [AUTO], [RGB], or [YP
].
R
C
].
B
R
P
].
B
R
Advertisement
Table of Contents
