Table of Contents
Advertisement
Chapter 7 Appendix — Precautions for attaching the Ceiling Mount Bracket
Precautions for attaching the Ceiling Mount Bracket
f When installing the projector to the ceiling, be sure to use the optional Ceiling Mount Bracket (Model No.:
ET-PKD520H (for High Ceilings), ET-PKD520S (for Low Ceilings), ET-PKD521B (Projector Mount Bracket))
specified by Panasonic Connect Co., Ltd. The Ceiling Mount Bracket (Model No.: ET-PKD520H (for High
Ceilings), ET-PKD520S (for Low Ceilings)) is used in combination with the Ceiling Mount Bracket (Model No.:
ET-PKD521B (Projector Mount Bracket)).
f Attach the drop-prevention set (hexagon head bolts with captive washers, wire ropes) that comes with the
Ceiling Mount Bracket to the projector. If you need the drop-prevention set (Service Model No.: TTRA0143)
separately, consult your dealer.
f Ask a qualified technician to do the installation work such as mounting the projector on the ceiling.
f Panasonic Connect Co., Ltd. takes no responsibility for any damage to the projector resulting from use of the
Ceiling Mount Bracket not manufactured by Panasonic Connect Co., Ltd. or the inappropriate choice of location
for installing the Ceiling Mount Bracket, even if the warranty period of the projector has not expired.
f Immediately remove the product that is not in use anymore by asking a qualified technician.
f Use a torque screwdriver or Allen torque wrench to tighten the screws to their specified tightening torques. Do
not use electric screwdrivers or impact screwdrivers.
(Screw tightening torque: 4 ± 0.5 N·m)
f Read the Installation Instructions of the Ceiling Mount Bracket for details.
f The model numbers of accessories and optional accessories are subject to change without prior notice.
r Specification for the screw holes to fix the projector (projector bottom view)
Unit: mm
338 - ENGLISH
M6
16 (5/8")
Advertisement
Table of Contents
