Table of Contents
Advertisement
[UNIVERSE]
[START ADDRESS]
5)
Press as to select [STORE], and press the <执行> button.
f The confirmation screen is displayed.
6)
Press qw to select [OK], and press the <执行> button.
Note
f If [ON(2.X.X.X)] or [ON(10.X.X.X)] is selected, IP address is calculated and set automatically.
[Art-Net CHANNEL SETTING]
Set the assignment of the channel.
For the channel definitions used for controlling the projector with the Art-Net function, refer to "Using Art-Net
function" (x page 187).
1)
Press as to select [Art-Net CHANNEL SETTING].
2)
Press qw to switch the item.
[2]
[USER]
[1]
f When [2] or [1] is selected, the function assigned to the channel is displayed by pressing the <执行> button.
f When [USER] is selected, proceed to Step 3).
3)
Press the <执行> button.
f The [Art-Net CHANNEL SETTING] screen is displayed.
4)
Press as to select the channel to set, and pressqw to switch the item.
[LIGHT OUTPUT]
[INPUT SELECT]
[LENS POSITION]
[LENS H SHIFT]
[LENS V SHIFT]
[LENS FOCUS]
[LENS ZOOM]
[POWER]
[SHUTTER]
[FADE-IN]
[FADE-OUT]
[GEOMETRY]
[CUSTOM MASKING]
[FREEZE]
[COLOR]
[TINT]
[RASTER PATTERN]
[ENABLE/DISABLE]
[NONE]
f The setting can be also made by pressing as to select the channel, pressing the <执行> button to display
the item list, pressing asqw to select the item, and pressing the <执行> button.
f Same item cannot be set for multiple channels, except for [NONE].
Chapter 4 Settings — [NETWORK] menu
Enter [UNIVERSE] to be used when the projector processes Art-Net.
Enter [START ADDRESS] to be used when the projector processes Art-Net.
Uses the channel assignment in standard setting.
Changes the channel assignment.
Uses the channel assignment with SDZ21KC series compatible.
SDZ21KC series: SDZ21KC, SDS20KC, SDW17KC, SDZ18KC
Adjusts the amount of light.
Switches the input.
Moves the lens position.
Adjusts the lens shift in the horizontal direction.
Adjusts the lens shift in the vertical direction.
Adjusts the focus.
Adjusts the zoom.
Controls the power status.
Controls the shutter.
Sets the fade-in time.
Sets the fade-out time.
Performs geometric adjustment.
Performs geometric adjustment using a computer.
To use PC-1, PC-2, and PC-3, the optional Upgrade Kit (Model No.: ET-UK20C) is required.
Freezes the projected image.
Adjusts the color saturation.
Adjusts the tint.
Displays the raster pattern.
Enables/disables the control of the projector with the Art-Net function.
No definition
ENGLISH - 153
Advertisement
Table of Contents
