Installing Slow Moving Vehicle (Smv) Sign - MacDon Draper D65 Installation Instructions Manual

3.14 Installing Slow Moving Vehicle (SMV) Sign

To install the SMV sign, follow these steps:
1. Remove existing bolt (A) in hose support at right end
reel arm.
2. Assemble SMV sign (A) and bracket (B) with a
3/8 NC x 3/4 in. carriage bolt (C) and smooth face lock nut.
Do NOT tighten.
3. Attach SMV sign and bracket assembly (A) to hose support
with a 3/8 NC x 3 in. hex head bolt (B).
4. Tighten hardware.
169784
INSTALLATION INSTRUCTIONS
Figure 3.85: Reel Arm
Figure 3.86: SMV Sign
Figure 3.87: SMV Sign Installed on Reel Arm
54
A
C
A
B
A
B
Revision H