The MultiPASS Settings
To customize the MultiPASS to your particular needs, you can adjust the general operation,
sending, receiving, printing, system settings, and speed dialing settings. There are two methods
of adjusting these settings:
Method 1: Using the MultiPASS Desktop Manager
You can adjust settings using the MultiPASS Desktop Manager software included with your
MultiPASS. For detailed instructions refer to
Method 2: Using the MultiPASS operation panel
You can also adjust settings directly via the operation panel of the MultiPASS. Detailed
instructions are described in the Stand-alone Fax Manual. Adjusting settings through the
operation panel is convenient when you do not have your MultiPASS connected to a PC.
Before adjusting any settings, decide whether you prefer to make changes from the MultiPASS
Desktop Manager or from the operation panel. Using both — the MultiPASS Desktop Manager
and the operation panel — may cause confusion. Changes made in the MultiPASS Desktop
Manager will override any corresponding settings made through the operation panel, and
changes made to settings through the operation panel will not be displayed in the MultiPASS
Desktop Manager.
n
If your MultiPASS is connected to a PC, we recommend using the MultiPASS Desktop Manager
to adjust any settings. If you are not using the MultiPASS Desktop Manager, you can ignore the
information in this manual.
Chapter 1
Chapter
6, Utilities, in this guide.
Introduction 1-4