Table of Contents
Advertisement
Jams in the Sheet Feeder
Use this procedure if the recording paper jams or misfeeds in the sheet
feeder. If this happens, the message CLEAR PAPER JAM appears in the
display.
1.
Gently pull any jammed paper out of the unit as shown.
2.
Remove the paper stack from the sheet feeder and reload it,
following the instructions in "Loading Print Media for Automatic
Feed" on page 2-43.
3.
Press STOP to clear the error message.
N
If the paper jam occurred while a fax was being received into the
MultiPASS C20's memory, that fax will print automatically when the
jam is cleared.
6-8
Troubleshooting
Make sure you push the paper to the back and right of the
sheet feeder, and that the stack is not higher than the paper
limit mark (D). See page 2-45 for more details.
If the Alarm light is on, press the RESUME button to clear the
error message.
If you are printing from a Windows application, follow the
instructions displayed by the software on your PC.
Chapter 6
Advertisement
Table of Contents
