Table 7. Twisted Pair Port LEDs on the AT-IE200-6FT Switch
LED
State
Solid Green
Flashing
Green
L/A
Solid Amber
Flashing
Amber
Off
The states of the LEDs on the twisted pair ports on the AT-IE200-6GT
Switch are defined in Table 8.
Table 8. Twisted Pair Port LEDs on the AT-IE200-6GT Switch
LED
State
Solid Green
Duplex
Solid Amber
Mode
Off
Solid Green
Flashing
Green
L/A
Solid Amber
Flashing
Amber
Off
The twisted pair ports on the AT-IE200-6FP and AT-IE200-6GP Switches
have two LEDs each. The LEDs are identified in Figure 11 on page 44.
Description
The port has established a 100 Mbps link to
a network device.
The port is transmitting or receiving data at
100 Mbps.
The port has established a 10 Mbps link to a
network device.
The port is transmitting or receiving data at
10 Mbps.
The port has not established a link with a
network device.
Description
The port is operating in full duplex mode.
The port is operating in half duplex mode.
The port has not established a link with a
network device.
The port has established a 1000 Mbps link
to a network device.
The port is transmitting or receiving data at
1000 Mbps.
The port has established a 10 or 100 Mbps
link to a network device.
The port is transmitting or receiving data at
10 or 100 Mbps.
The port has not established a link with a
network device.
IE200 Series Installation Guide
43