Table of Contents
Advertisement
Chapter 3: Installing the Switch
66
The selected wall location for the base should adhere to the
recommendations in "Reviewing Site Requirements" on page 55.
3. Hold the switch on the wall and secure it with four screws (not
provided). Refer to Figure 22.
Please follow these guidelines as you position the switch on the wall:
You should secure the switch to the middle of the wood stud
identified in step 2.
The switch must be oriented as shown in Figure 22. Do not install
the switch horizontally or upside-down.
Be sure to leave sufficient space from other devices or walls to
allow for adequate air circulation around and through the cooling
fins. Refer to "Reviewing Site Requirements" on page 55 for further
information.
Wood stud
Figure 22. Attaching the Switch to the Wall
4. Go to Chapter 4, "Cabling the Ports" on page 71.
Advertisement
Table of Contents
