Features; Twisted Pair Ports; Power Over Ethernet; Sfp Slots - Allied Telesis IE200 Series Installation Manual

Features

Twisted Pair
Ports
Power Over
Ethernet

SFP Slots

Here are the basic features of the switches.
Here are the basic features of the twisted pair ports:
 4 ports per switch
 10Base-T and 100Base-TX compliant on the AT-IE200-6FT and
AT-IE200-6FP Switches

10Base-T, 100Base-TX, and 1000Base-T compliant on the AT-
IE200-6GT and AT-IE200-6GP Switches
 IEEE 802.3u Auto-Negotiation compliant
 Auto-MDI/MDIX
 100 meters (328 feet) maximum operating distance
 IEEE 802.3x flow control in 10/100Base-TX full-duplex mode
 IEEE 802.3ab 1000Base-T
 Jumbo frames up to 9KB
 RJ-45 connectors
Ports 1 to 4 on the AT-IE200-6FP and AT-IE200-6GP Switches have these
Power over Ethernet features:
 Support PoE (15 watts) and PoE+ (30 watts)
 Powered device classes 0 to 4
 Maximum PoE budget of 120 watts with one or two power supplies
 Port prioritization
 Alternative A wiring
The two SFP slots support the following types of transceivers:

100Base-FX transceivers

1000Base-SX/LX transceivers
 Single-port Bi-directional (BiDi) 1000Base-LX transceivers
 1000Base-ZX transceivers
 1000Base-T twisted pair transceivers
SFP transceivers must be purchased separately. Refer to the product
datasheet for a list of supported transceivers.
IE200 Series Installation Guide
23