Table of Contents
Advertisement
Table 9. Twisted Pair Port LEDs on the AT-IE200-6FP Switch
LED
State
Solid Green
Flashing
Green
L/A
Solid Amber
Flashing
Amber
Off
The states of the LEDs on the twisted pair ports on the AT-IE200-6GP
Switch are defined in Table 10.
Table 10. Twisted Pair Port LEDs on the AT-IE200-6GP Switch
LED
State
Solid Green
Solid Amber
Flashing
PoE
Amber
Off
Description
The port has established a 100 Mbps link to a
network device.
The port is transmitting or receiving data at 100
Mbps.
The port has established a 10 Mbps link to a
network device.
The port is transmitting or receiving data at 10
Mbps.
The port has not established a link with another
network device.
Description
The port is delivering power to a powered device.
The port is connected to a powered device but the
switch has shut down PoE on the port because of
a fault condition.
The port is connected to a powered device but is
not delivering power to it because the switch does
not have sufficient free power.
This LED state can result from the following
conditions:
- The port is connected to a non-PoE device.
- The PD is powered off.
- The port is disabled in the management software.
- PoE is disabled on the port.
IE200 Series Installation Guide
45
Advertisement
Table of Contents
