Table of Contents
Advertisement
HANDLE MACHINE READY FOR INSTALLATION OF ATTACHMENT
4.
Operate each work equipment control lever and attach-
ment control pedal fully to the front, rear, right, and left a
few times within 15 seconds to release the internal pres-
sure in the hydraulic circuit.
5.
Set the lock lever to LOCK position (L).
After preparation is completed, replace the additional filter for breaker according to the following procedure.
METHOD FOR REPLACING ADDITIONAL FILTER ELEMENT FOR BREAKER
1.
Loosen oil filler cap (F) slowly on the top of the hydraulic
tank to release the internal pressure in the hydraulic tank.
2.
Set a container to receive the oil under the additional filter
at the position pointed with the arrow.
6-54
ATTACHMENTS AND OPTIONS
Advertisement
Table of Contents
