Table of Contents
Advertisement
EXPLANATION OF COMPONENTS
BREAKER/ATTACHMENT SETTING
On "Breaker/Attachment Setting", you can change the name of attachment displayed on the monitor and the at-
tachment oil flow rate setting.
For the machines that have no attachment, "Attachment Setting" menu is not displayed.
1.
Select "Attachment Setting" (1) on the "Machine Setting"
menu (b) screen, then press the switch F6.
2.
On the "Attachment Setting" screen shown in the figure,
select an attachment setting to adjust and press the switch
F6.
On "Attachment Setting" screen shown in the figure, you
can perform the following operations with switches F1 to
F6.
F1: Changes the name of the selected attachment setting.
F2: Changes the oil flow rate of the selected attachment
setting.
F3: Moves to the next item (1 line below). When it is on the
last line, it moves to the first line.
F4: Moves to the previous item (1 line above). When it is on the first line, it moves to the last line.
F5: Cancels the selection and returns the screen to "Machine Setting" menu screen.
F6: Allocates the selected setting to that of ATT/P or ATT/E mode.
Changing Attachment Setting name
You can change the name for the attachment setting to desired name.
You can use alphabet letters (A to Z), Arabic numerals (0 to 9), symbols (#, *, +, -, and /), and the blank (space).
1.
Select a setting to change on the "Attachment Setting"
screen, then press the switch F6.
•
When working mode is set to B mode
Change the name by referring to "Changing the
"Breaker Setting" name".
•
When working mode is set to ATT/P mode or ATT/E
mode
Change the name by referring to "Changing the "At-
tachment Setting" name".
3-72
OPERATION
Advertisement
Table of Contents
