Table of Contents
Advertisement
SUPER LONG FRONT BOOM AND ARM
1.
Arm-Link coupling pin (1 place)
2.
Arm-Bucket coupling pin (1 place)
3. Link coupling pin (2 places)
4. Bucket cylinder rod end (1 place)
5. Bucket-Link coupling pin (1 place)
EVERY 100 HOURS SERVICE
LUBRICATING (MANUAL GREASE SYSTEM)
The minimum greasing interval is 100 hours.
However, more frequent greasing will be required depending on conditions/environment.
1.
Set the work equipment in the greasing posture below, then lower the work equipment to the ground and
stop the engine.
2.
Using a grease pump, pump in grease through the grease fittings shown by arrows.
3.
After greasing, wipe off any old grease that was pushed out.
6-30
ATTACHMENTS AND OPTIONS
1
5
3
4
3
2
AM091470C
KS000661
Advertisement
Table of Contents
